EXPANDABLE & COMPLETELY WIRELESS doorbell system is suitable for any door of your home or business. Receiver unit plugs into an outlet and the battery-free transmitter adheres to the door frame with 2-way tape. Add on extra receivers (PE-R) or transmitters (PE-T). This is Model: PE-Base


4 VOLUME LEVELS (50-80db) accommodate babies and light sleepers. Choose from 32 musical tones. Make volume and music selections easily with 2 buttons located on the side of the plug-in receiver.


EASY TO INSTALL and implement. Components are factory paired for your convenience. No tools are required as the push button is affixed next to the entry point with included double-sided adhesive tape.


Part Number ST-FB-531P-B
Item Weight 7.7 ounces
Product Dimensions 4.7 x 2.4 x 4.3 inches
Colors BLACK; WHITE
Material ABS Plastic
Installation Method Self-adhesive tape (included)
Number Of Pieces 2
Coverage 450 feet
Switch Style Push button
Batteries Included? No
Batteries Required? No


KINETIC PUSH BUTTON generates energy (without need for batteries) to create a wireless signal. Never miss a visitor because of a dead battery. With an IP44 waterproof rating, our transmitter is weather-resistant for all climates.


150-METER RANGE with a single transmitter unit. To increase the range to up to 400 meters, purchase additional receivers or transmitters and increase to your network. Power consumption is less than 0.2W per unit.




Reset

For both battery operated receiver and plug-in receiver, you just need power off the product, and press and hold the melody selection button, then plug in receiver or put back the battery into receiver battery compartment, then hold the button for 10 seconds. All pairing codes will be clear. You can start to pairing the necessary bell push button and receiver now.


How to Pairing

Hold the receiver's pairing button for 3 seconds until the receiver has "Ding-Dong" sound. Then press the kinetic bell push, then the receiver has "Ding" sound means pairing between the kinetic bell push and receiver is completed. The receiver will have another "Ding-Dong" sound to exit pairing mode.


Manual

Please click below to download the manuals.